Specs Updates & Pics

My system's spec updates

17" Macro digital monitor, max resolution 1600 X 1200@60Hz (RM450, used from Danny)
Logitech Optical Wheel Mouse USB (RM95) - best budget optical mouse out there now
KOSS UR-20 headphone (RM100) - crystal clear sound
Creative Gamepad Cobra II USB (RM80) - comes with a thumb - operated throttle wheel
Sony 52X CD ROM (RM135) - time to change my old one, still a sony
My system's cooling spec updates
CPU cooler - Super Glob (Globalwin FOP 38 w/delta fan + AVC 5500 rpm fan

Changed the layout of the fans on my acrylic window by rotating the fans 90 degrees clockwise. Now only 3 fans operating, 2 X 80 mm panaflos blowing in, direct onto the cpu & pci slots, & 1 X 120mm seada blwing air out. Temps were lower by about 2 C with this setup.

Now, time for some pics (all pics were taken using Prolink DC 305 digital camera, RM199, from Suteki Photo Studio, Rawang)

View of my case, after changing the layout of the acrylic window, so that the fans will blow directly onto the CPU & PCI slots. The 2 fans on top of the case will be taken out. Temps were higher when those 2 is switched on, probably due to the distance between them & the intake fans

A close - up view on the acrylic window, revealing the cluttered innards. Trying to work on that one. Pardon the picture quality, couldn't expect more from an RM199 camera.

The baybus switch, with the Senfu temp probe, showing temp of 42.1C, at idle, no air con. Also my Sony 52X CD ROM.

The top part of my casing, U can see the 120mm Seada blowhole at work here. That fan pushes out 86 cubic feet of air per minute (cfm). Also visible is my KOSS UR20 headphone & my baybus switches. Only 2 LEDs are working. I'll rewire them after I remove the 3 extra fans.

<Back Next>